Ok, while I'm at my springs mods on my 2008 Speed Triple I want to tackle this problem. My fuel light is constantly on and when i plug my bike up to TuneECU I get P0460 as the source of the problem. It is the only error code that is present. Anyone had the same issue and resolve the problem? Any help/suggestions are greatly appreciated!
CPHowell
According to my 2006 book that is "p0460 fuel level sensor circuit malfuntion"
I dont know if my pin# will help you as things probably changed from my year to yours .
there is a 5 point pinpoint test for this code
1. check the cable and terminal integrity ECM pin A24 and A06 if OK disconnect the sensor and move to step 2
2. Check the cable for a short circuit ECM pin A24 to ground
3. Chk continuity ECM pin A24 -- BlackGreen -- to Fuel level sensor pin 4
ECM pin A06 -- PinkBlack -- to fuel level sensor pin 3
4. Check for a short between pin 3 and pin 4 of the sensor.
5 reconnect and clear the code , if the problem is still there " contact your dealer "
Hope this helps a little
I dont know if my pin# will help you as things probably changed from my year to yours .
there is a 5 point pinpoint test for this code
1. check the cable and terminal integrity ECM pin A24 and A06 if OK disconnect the sensor and move to step 2
2. Check the cable for a short circuit ECM pin A24 to ground
3. Chk continuity ECM pin A24 -- BlackGreen -- to Fuel level sensor pin 4
ECM pin A06 -- PinkBlack -- to fuel level sensor pin 3
4. Check for a short between pin 3 and pin 4 of the sensor.
5 reconnect and clear the code , if the problem is still there " contact your dealer "
Hope this helps a little
Your welcome.
Don't forget to post your model year in your profile so all can know if you need help with anything else .
Don't forget to post your model year in your profile so all can know if you need help with anything else .
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
