Triumph Rat Motorcycle Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Bike of the Month Challenge!

1 - 10 of 10 Posts

·
Premium Member
Joined
·
3,599 Posts
Discussion Starter · #1 ·
I did a search but you cannot search for "How To" because "to" is too short. I found nothing in the tech articles under C for carb, R for rejet or J for jetting.

Anyone know of a good step-by-step guide, preferably with the carbs still on the bike? I just need to know what I'm looking at and what-is-where. 2008 Bonnie - US market, of course.
Thanks a bazillion,
 

·
Premium Member
Joined
·
3,599 Posts
Discussion Starter · #5 ·

·
Moderator
Joined
·
30,523 Posts
When looking for a great source of information, I heartily recommend our sticky "great source of info".

It is here, wherein you will find links to a variety of threads, one of which is the one you seek.

If you find a thread that you feel should be earmarked, please feel free to do so by adding a reply to the "great source of info" sticky.


http://www.triumphrat.net/twins-tec...intenance-tuning-modifications-and-so-on.html
 

·
Registered
Joined
·
220 Posts
noob rejetting

just thought i'd chime in, but as ventura and prop probably know, i have had an ongoing ordeal with jetting for the first time. dono if you're already familiar with the rejetting process, but if not check out this thread too.

http://www.triumphrat.net/twins-technical-talk/81512-re-jet.html


particularly the last 5 pages or so contain a lot of QnA about rejetting a bike for the first time, so if you think you have a dumb question about it, chances are i've already asked it and had it resolved in that thread LOL.

that thread, pauls write up, and continued support from members on here was very helpful!!!!
 

·
Premium Member
Joined
·
3,599 Posts
Discussion Starter · #8 ·
Thanks for the additional link Vegas. :beerchug:
 
1 - 10 of 10 Posts
Top