Triumph Rat Motorcycle Forums banner
1 - 9 of 9 Posts

· Registered
Joined
·
1,181 Posts
With the ignition (but not the engine) on,
press and hold down ALL 3 buttons for 4 seconds.
At this point, the speedometer reading will start flashing a single digit number - usually 2.
Using the scroll button, that number cycles between 1 and 3, with 1=kph, 2=mph and 3=mph as well.
Pressing "set" sets the desired mode.
1: kph/liters
2: mph/UK mpg
3: mph/US mpg
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top