Triumph Rat Motorcycle Forums banner

valve timing

2028 Views 3 Replies 3 Participants Last post by  kubbie
OK guys, I have a question about setting the cams/crank/timing up on my TT.

Motor dropped a valve six months ago, all back together now, but I couldn't put the crank on its timing mark when I torn it down.

The cams are OK and on the mark, but the centrifugal breather on the crank is supposed to point at about 3o'clock.

Problem is to keep the timing chain tight the breather is either pointing at 2o'clock or nearly 5o'clock position.

Adjusting the timing chain one tooth either way doesn't help.

So are the marks that far off, or did I mess up somewhere?

The bike is running, just seems really wimpy.Don't know if its the bike being "off " in timing or me being used to its replacement (06 Sprint ST).

Any opinions are welcome.

kubbie :???:
1 - 2 of 4 Posts
the info helps, was just wondering if the crank marks actually do line up w/ the split line, or are just close.

Will be double checking everything when I get back from Vegas next week.

1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.