[Motoleo]

Can any of you point me to or post photos of your Bonneville with the factory summer screen in place and possible photos of the mounting hardware.

I'm thinking of getting one and want to make sure the mounts will not interfere with any thing I've put on my stock bars.

Also how can the mounting brackets betaken off one they are mounted and how easily?

Thanks

 

[merlin]

There is a bit of a poor illustration on this website under 'Downloads'. Not very helpful.
The mounting hardware would not be a 'quick' on/off.... unless you're really fast with wrench. The four brackets need to be adjusted just so to match the windshield. Leaving the brakets on without the windshield looks really dumb, so...

 

[Loxpump]

These aren't the best pics, but I bought two Bonnevilles last year both with wind screens. The green Bonnie has the Roadster Screen and the red one has the Summer Screen. They both mounted the same. One set of brackets bolted to the underside of the top of the triple tree, and the other brackets attached to the side of the headlight with the headlight bolts. Not too hard to remove, but like merlin said not a quick on/off. I hope the pics turn out ok and are some help.

 

[mecscc]

My album, link below, has pics. I found it too short for me so I bought a ClearView screen, that uses the hardware. Like it much better with the taller screen. There are pics of it installed also. It looks the same but is 4" wider and much taller, 18" 19.5" and 21" choices.

If you can find the hardware somewhere relatively cheaply I'll sell you my summer screen at a low price, without hardware. It is like new.

Monte

 

[Motoleo]

Thanks for all the replies and help.

Monte, I sent you a PM.