Triumph Rat Motorcycle Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
In the process of sorting the T100a at the minute, I'll be rebuilding the carb. Just checked it out and its actually stamped 376/79, not the 376/273 as it should be.
My main question is - are the carb bodies basically the same, except the jets / needles etc? I know the bores are both 1". So will I be ok to keep the same body and just swap over / replace all of the internal gubbins?
Tom
 
1 - 2 of 2 Posts
Top