Triumph Rat Motorcycle Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter #1
Hi All:

Has anyone installed an RG Tail Tidy with the stock '05+ panniers and do the blinkers clear the panniers?

I ask because the stock tail unit is pre-configured to move back an inch or so when panniers are installed so they they will clear the rear blinkers.

I don't want to buy the unit only to find it won't work correctly with the panniers.

Thanks for any input.
 

·
Registered
Joined
·
561 Posts
Mate,
when I fitted my R&G tidy tail I found the stock indicators were too big, so when the panniers were on they were bent to the rear. I replaced them with a set of smaller carbon lookalikes which fitted fine. I also made up a plate which I riveted on to the R&G frame to stop all the grud being flicked up from the back wheel covering all the wiring. Anyway hope this helps and,

cya The Tankman
:upthumb: :upthumb: :upthumb:
 

·
Registered
Joined
·
259 Posts
Discussion Starter #3
Thanks, Tankman. Just what I wanted to know.
 
1 - 3 of 3 Posts
Top