Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,155 Posts
Undo the three sleeve nuts, remove the springs and lift the plate away. The spring sockets in the pressure pate may also fall away. The clutch plates can then be pulled out. You might need a piece of wire with a small hook on the end to get the last ones out.

Note the order they come out for when you re-assemble them.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top