Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
29 Posts
Hi guys. Fitted a Powerbronze hugger to mine too. Just don't follow the instructions that come with it unless you remove the rear wheel first. I attached the frame to the hugger first , then loosened and removed the rear caliper to get the hugger under the brake line, then bolted it all down without having to remove the wheel (I didn't have the necessary tools at the time for removal).The only slight modification was that two of the holes were approx 5mm out of position on the hugger and I had to oval these out to get a line up for the bolts. :hammer:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top