Triumph Rat Motorcycle Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Bike of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter · #1 ·
I have installed the triumph performance upgrade exhaust with cat bypass and K&N. Anyone know of a good PCIII map for this config?
 

·
Registered
Joined
·
2,067 Posts
On 2006-11-17 10:02, NYTBird wrote:
I have installed the triumph performance upgrade exhaust with cat bypass and K&N. Anyone know of a good PCIII map for this config?
DynoJet has a tune for it. It's called "performance exhaust".

You need to have the stock Triumph tune in the ECU (20050). :cool:
 

·
Registered
Joined
·
88 Posts
Discussion Starter · #3 ·
I saw that one.. But ir says it's for a stock air filter.
 

·
Registered
Joined
·
2,067 Posts
On 2006-11-17 11:00, NYTBird wrote:
I saw that one.. But ir says it's for a stock air filter.
That's true. They don't have one for a K&N filter. Probably doesn't matter. It's a canned tune. If you really want the optimum tune, get a custom map on a DJ dyno.
 

·
Registered
Joined
·
88 Posts
Discussion Starter · #5 ·
Got a point there... Thx
TBird
 

·
Registered
Joined
·
88 Posts
Discussion Starter · #6 ·
Well... Installed the PCIII. For anyone who has not followed this thread I had previously installed the Triumph performance exhaust with cat bypass and K&N filter and it was running lean...(poping at decel). Since then I Installed the PCIII with the map for the perf exhaust. I still think it's lean... Has that sour lean burn smell. Although it seams to be running nice. Just wondering if anyone has a custom map for my config or any advice on custom tuning with the PCIII.

THX in advance
TBird
:???:
 
1 - 6 of 6 Posts
Top