Triumph Rat Motorcycle Forums banner

oil,temp, hi beam bulb removal

854 Views 5 Replies 4 Participants Last post by  Johnjohn
Hey guys I've read all the threads, I've got the tach speedo pods apart for bulb replacement on '98 TBS
for the tiny, idiot light bulbs in between the tach/speedo but can't figure out how to get the little %*#^ 's out..... Haynes Manual on order....would that really help? I've twisted and pulled the small rubber rings holding the wires with a pin nose plier.............but nada, any help appreciated, sorry for the lame request....the fly screen doesn't help either. I just removed ,cleaned, jets, carbs, airbox; geez.... I thought I could replace a couple of miniature bulbs.... for the lov a .............

[ This message was edited by: thaw on 2007-01-30 17:06 ]
1 - 1 of 6 Posts
For what it is worth Haynes manual says to 'gently pull the bulbs out of their holders' then it has a picture of a guy holding the bulb from the holder, so I guess just pull it out.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.