Needing a pair of unit 500 connecting rods.
Join the discussion
Recommended Reading
-
Help Identifying this engine
Classic, Vintage & VeteranHi all, after having to sell my 66 Bonnie, I am now starting another project and have this old engine case from a trade so wanted to ask if anyone could help me identify this model and year from the serial number. I think it is a 71 engine but from everything I read, I expected to see 2 letters...- 10
- 373
-
T120/T140 rollerball gearbox plunger 57-3660
Classic, Vintage & VeteranHi saw these advertised what do you reckon, good or waste of time? https://www.ebay.co.uk/itm/BSA-A50-65-Triumph-T120-T140-T150-4-5-speed-roller-ball-gearbox-plunger-57-3660/274284579328?hash=item3fdca28a00:g:~WoAAOSwTuJYnLqa- 3
- 93
-
One cylinder not firing - choke or throttle cable likely culprit?
Classic, Vintage & VeteranHi all, Finally a warm enough day here for me to fire up the 77 bonnie for the first time in a few months and try out some of the repairs and tweaks I've done. After a few kicks, bike fired up, ran very rough, then died. I did a few quick tests and determined the left cylinder is not firing. I...- 17
- 588
-
1972 Daytona Clutch
Classic, Vintage & VeteranI drove my 1972 Daytona after it sat for around a month (I unstuck the plates with the kick start) and for some reason now the friction zone on the clutch has become non existent and it goes into gear with only a sliver of travel left prior to full release of the lever. It’s very odd - any idea...- 26
- 973
-
Gibsonsmu · updated
-
Best Ready-Made Looms in the UK?
Classic, Vintage & VeteranEvening all, Finally, I have some space to swing a cat in my workshop, so it's Winter Bonnie Resto Time and along with many things, I need to buy a loom. OK, before anyone sarcastically points me at the search function ;-) I know this subject has been talked about in the past, and I have been...- 3
- 264
-
Boggie · updated
Join now to ask and comment!