Triumph Rat Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,924 Posts
First if you are going to use this tank you will also need to get a UK seat.
There are no premade stripe kit's for the UK T140D tank I am aware of as the tanks were all hand lined. The T140D airbox covers WERE tape striped. I would think any good sign painter could stripe the tank using paint. If you obtain a copy of the book ORIGINAL TRIUMPH BONNEVILLE by Gerald Kane the are pictures of a UK T140D (on pages 99,100,and 101). Also as there were 3 versions of the breadbox between 71 and 81. If you are goin to use this tank with the T140D plastic airbox covers be sure the tank has the petcock's approx 6 inches forward of the rear of the tank this would the third version and was (Possibly) first used (I just recently found out) on the 77 UK TR7. Also you will need a 83-4118 tie strap for the front of the tank. This can be easily made from strap stock.
 

·
Registered
Joined
·
5,924 Posts
As an addition on page 125 of TRIUMPH T120/T140 BONNEVILLE (Steve Wilson) there is an excellent picture of a stock UK T140D. By the angle of the shot you can see how the UK seat is shaped at the front. (More blunt and shorter)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top