[SPE3D]

I work for a civil engineering firm and am on CAD a lot. I'm pretty darn good. Anyway, I was told today by a couple of coworkers that I can send them a CAD file and they can fab up whatever it is on one of there many machines(from their other jobs as mechanical engineers). They mention CNC and waterjet machines among others.

I was just wanting some suggestions on what to design.
Let me know what you guys have been wanting, but haven't seen on the market or something that can be improved upon. The sky is the limit.

Thanks

 

[Limey]

Wooohooo! A more attractive triple tree would be nice. one that doesn't cost $1500. :-D

 

[Hairball]

+1 on the triple tree or just a nice triple top clamp.

 

[1050Pome]

A nice Titanium tank protector that can house cotton wool for ******* :-D

 

[ctrhenry]

custom titanium clutch covers , pegs and wheels

 

[SPE3D]

Great ideas guys. I'll start designing the levers tonight. They should be cheeper than other levers because the development will be a "labor of love". Materials should be fairly easy to come by, especially for smaller things like levers and brackets. Keep the ideas rolling.

This will all probably take quite some time, but it will be worth it.

 

[Catenaccio]

I'm in!

 

[BUCKET]

A robot woman with big mungumbo's. :-D :hammer:

 

[Dobieman]

Here is an easy one, heel guards that arent sharks teeth and have a couple different lengths. I can melt my boot on the exhaust with the stock one. :hammer:

 

[zooplancton]

that IS cool.
triple clamps would be cool, rear sets (of course) would be cool, axle sliders, risers!, caps for the pivot area, heel guards (although i'm pushing for silver carbon fiber on those).

the list is long. cool capabilities!


gotta start playing the lottery. i want a shop before i get too old.

 

[stmike]

On 2007-01-22 20:15, Dobieman wrote:
Here is an easy one, heel guards that arent sharks teeth and have a couple different lengths. I can melt my boot on the exhaust with the stock one. :hammer:

+1. Been there, done that.

 

[jsek29]

Hows about a set of sliders that have mounts identical to the rear foot peg mounts? They would fit right into the bracket that comes down over the exhaust and end in stubby buttons of UHMW.

 

[SPE3D]

That's original. It seems pretty easy, but I wonder if the mounts would actually hold up in a fall. I'll work on it.

 

[jsek29]

They held up when I dumped it, though I wasn't going real fast at the time. Seems like a great piece that would be easy to design. you could make it hold almost any set of sliders, from Sky King to LSL or Lockhart Phillips (very pretty). Either mushroom shaped or the longer UH-MW tubes (could double as foot pegs). Or create your own idea, the material isn't hard to machine to shape.

 

[STEVOMERCKX]

are the machines able to work with titanium? and is your company able to get raw titanium? i think just bunch of random titanium parts would be t!ts in your mouth.

 

[zippythehog]

How about some cool bladed spinners-Ben Hur style for the wheels....Nah bad idea.
<BR>
<BR>How about a silencer that had a volume control. You could turn it out for louder, in for quieter. But the pipe would have to be long enough to keep from having exposed parts but short enough to be practical. Maybe a ratchet mechanism to allow movement. Maybe make a device that would allow internal alignment of holes in plates for louder, staggering them for quieter. And it should fit a T 300 because the only pipe available is a D & D. It should also be lightweight.
<BR>
<BR>So if something like this exists, I'm not aware of it.
<BR>
<BR>Laugh if you want-they laughed at Hughey Long.
<BR>
<BR>If it works- "Remember me when you come into your kingdom."
<BR>

[ This message was edited by: zippythehog on 2007-01-22 22:45 ]

 

[itchin]

Get a set of pazzo levers and copy them, (shortys), And sell them for half what real ones cost. :-D

 

[Devious2XS]

Don't screw around with the small stuff. If you are serious, sit down and make a small centrifugal supercharger for cheap. :-D

 

[24gt]

On 2007-01-23 08:34, itchin wrote:
Get a set of pazzo levers and copy them, (shortys), And sell them for half what real ones cost. :-D

+111111

 

[nakedlover]

i'm backing the pazzo copy idea!!!!!
make'm affordable and you"ll have
em lining up!