Joined
·
498 Posts
Does anyone know what else the mighty Mikuni 36mm CV carb was used on? Suzuki GSX-R, Kawi Zephyr? It looks from Mikuni USA website, they only make the Harley conversion?
Zip
Zip
Mikuni 36mm CV carbs hung on T-300s
1 - 6 of 6 Posts
Joined
·
728 Posts
For Nancies!
Stick a brace of PHM40 Dellortos on! :-D
You'd be seriously over-carbed then...I reckon!
If it is worth doing...it is worth doing to excess!!! :-D
Nige.
Stick a brace of PHM40 Dellortos on! :-D
You'd be seriously over-carbed then...I reckon!
If it is worth doing...it is worth doing to excess!!! :-D
Nige.
Joined
·
498 Posts
I'd love a set of Dellorts but the price is a bit prohibitive. In fact, I'd be happy with a set of Kehins if I could find them.
BTW Balla, what kind of carburetors do the mixing on the TBS?
Zip
BTW Balla, what kind of carburetors do the mixing on the TBS?
Zip
Joined
·
728 Posts
I am using the stock Keihins as fitted to the Legend, TBird & I think, TBS too?
They do seem to fuel better than the Mikunis on the early TBirds.
I haven't tried it, and am quite prepared to be corrected by those that have, I think 36mm would be too big a choke for a 900 Triple.
30 - 32mm is about right to deal with a displacement of about 300cc IMO
36 - 40mm carbs are better suited to big twins.
Nige.
They do seem to fuel better than the Mikunis on the early TBirds.
I haven't tried it, and am quite prepared to be corrected by those that have, I think 36mm would be too big a choke for a 900 Triple.
30 - 32mm is about right to deal with a displacement of about 300cc IMO
36 - 40mm carbs are better suited to big twins.
Nige.
Joined
·
110 Posts
My 95' Sprint 900 came from the factory with 36mm's. Now I don't know how it would handle 40's
1 - 6 of 6 Posts
