Triumph Rat Motorcycle Forums banner

M Bars and Plugs/Mirrors Conundrum

1107 Views 7 Replies 7 Participants Last post by  DrPangloss
To quote NewBonnevillle:

"Bars WITH bar end plugs WILL accept the stock end cap or our chrome bar end cap (but not bar end mirrors?).
Bars WITHOUT plugs will accept bar end mirrors."

So, does that mean bars WITH bar end plugs won't accept bar end mirrors - any bar end mirrors?

Is all hope lost for bar end mirrors? You will never be able to put them on so you should abandon all hope and save up for new M Bars WITHOUT bar end plugs if you want bar end mirrors??
1 - 1 of 8 Posts
I'm not sure if the closed ended M bars look like the stock bars, but I was able to use the Napoleon mirrors (from with a little trimming of the black rubber plug insert, the stock screw, and a washer.

can we assume that the closed ended M bars might work as well if the stock end caps work?

but maybe the M bars close all the wayto the very end. the stock ones like about a 1" or so depth before it closes up.

hope that helps :???:
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.