Joined
·
712 Posts
Speigler haas an LSL tubular handlebar kit available for the T3 bikes, including my 96 1200 Daytona.
Anyone have experience w/ the kit?
Anyone have experience w/ the kit?
LSL tubular bar kit
1 - 4 of 4 Posts
Joined
·
712 Posts
Speigler haas an LSL tubular handlebar kit available for the T3 bikes, including my 96 1200 Daytona.
Anyone have experience w/ the kit?
Anyone have experience w/ the kit?
Joined
·
712 Posts
Speigler haas an LSL tubular handlebar kit available for the T3 bikes, including my 96 1200 Daytona.
Anyone have experience w/ the kit?
Anyone have experience w/ the kit?
Joined
·
712 Posts
Speigler haas an LSL tubular handlebar kit available for the T3 bikes, including my 96 1200 Daytona.
Anyone have experience w/ the kit?
Anyone have experience w/ the kit?
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
T595 Turnsignal Dangle
Daytona DeliberationsI put her away last fall, all was well. I went out to the garage two days ago to look for the engine number and low and behold both rear turn signals were dangling by their wires. I bought this M/C new 04/10/1998 so it needs some gentle upgrades. Since the rears are toast I imagine the fronts...- 5
- 137
-
T595 Daytona oil pump problem
Daytona DeliberationsI bought a 595 with low miles from a dealer I know (and trust) for not much cash. Everything ok except no oil pressure. He assured me it hadn't been run for long with light on and as its was low miles and I wasn't paying more than the forks alone were worth I took it away. Problem is that the...- 3
- 156
-
Lost compression all 3 cylinders
Daytona Deliberations2002 Daytona 955i has no compression in all cylinders. It stopped running 8 years ago. I’m just getting to it now. I put oil in all 3 cylinders with the same results. Slight puffs out of all 3 cylinders. Can’t figure how all behave the same either. Seems super unusual which is why I hoped...- 7
- 365
-
Slipping cluch?
Daytona DeliberationsHi all. I have ´97 T595 and I have a feeling that my cluch is slipping. When taking off- all is OK, but when in 4 or 5 gear and about 6000-7000 RPM and you open her good, then it feels like cluch slipping. And it's nothing like your RPM's go sky high then, it yust feels like it's slipping...- 6
- 287
-
I see Clymer doesn’t sell Triumph manuals
Daytona DeliberationsWould someone familiar with Clymer manuals recommend a manual with a similar approach? I have had great success working on old Hondas with Clymer as a guide. I’m not looking for anything free. I’m looking for the name of a publisher. I need to go into the engine of my 2002 Daytona 955i and...- 2
- 159
Join now to ask and comment!