Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
653 Posts
A loss of power with a load on usually indicates an ignition problem. If you go to the trouble of looking at the plugs, you should go ahead and replace them. To check the plug wires-start up the bike and mist water on the wires and look for arcing which will cause poor running or start bike in the dark and look for arcing. This will tell you if there is a cracked wire (that cannot be seen). The 900 usually does not have the coil issues of the 1200, but that would be the next place to look.
Hope this helps
Mark
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top