Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
915 Posts
If you are stalling when the throttle is closed, main jets probably aren't the issue. How many turns out on the idle mixture screw are you running? Mine was set from the factory at about 1 1/4 turns out, but even opening it up to over 3 turns didn't stop the stalling at stop signs/traffic lights. Going to 42s, set about 1 1/2 turns out, cured it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top