Jenks carb tuning specs with predators

1980 Views 4 Replies 4 Participants Last post by kliff, Feb 3, 2007

NESS

Discussion Starter · Feb 2, 2007

I just ordered some jets and plan to follow the carb settings given by Jenks Bolts (135m, 42p, stock needle w/1 shim, 3 turns.) I will be running predators with a unifilter. Any opinions or experience with this set up your comments would be appreciated.

Save

1 - 1 of 5 Posts

SCCTrim

· #2 · Feb 2, 2007

That'll probably get you close, I dont use the airbox but I'd say your close.

Should you do a airbox elim expect to run something on the order of 150/155 main-42/45 pilot and 1 to 3 shim's on the needle and about 2.75 to 3 turns out.

Save

1 - 1 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.