Triumph Rat Motorcycle Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
3,678 Posts
Alright Silkie,

S**** timing for it to let you down..! does sound like pick up coil though, when hot it misbehaves, let it cool a little and it works again, easy enough to get to behind the R/H side timing cover, the only place you'll get one today is a breaker (All Bike Engineering in Greenwich might be worth a go) who knows, you might be able to fit one and play catch up with your mates, I would order a new one long term though.

Good luck either way

Mot

Oh and I could be wrong ? but I think most of the early T3 bike ones would do, Trophy Daytona etc etc
 

·
Premium Member
Joined
·
3,678 Posts
When you fit your new mounting rubbers lube them up with some red rubber grease or silicone lube, they will grip much firmer than your old rubbers..which is good, but can also grip too well and possibly snap a lug off your panels..!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top