Joined
·
510 Posts
I learned how big an idiot I am today.....
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
Electrical Advice Needed
Maintenance & Workshop TalkI installed LED halos and strips inside my 2008 Sprint ST 1050 headlight assembly. I wired them directly to the ‘Sidelight’, or what we refer to here in the U.S. as the ‘Park’ lights. So, whenever the ignition is on (whether the bike is running or not), the LED’s are on, as are the 'Park' lights...- 0
- 42
-
Thruxton 900 rough idle.
Maintenance & Workshop TalkI have a 2015 thruxton 900. For some reason when I turn it on the RPMs shoot to 6K RPMs and stays there for about a minute or so then drops down to where it barley stays on then it'll die. I've tried to adjust the idle knob on the side but it makes no difference. I'm not sure what to do to fix...- 0
- 41
-
Dchiu · updated
-
Suspension linkage mods
Maintenance & Workshop TalkHi all, it's been a while since I've been on here I'm still racking up the miles, and continuing to evolve my 955i tona. This time round it's the suspension linkages; I took them apart to check them out and the rollers disassembled themselves all over the garage floor. They were dry as a bone...- 0
- 68
-
BadMiker · updated
-
Installing turn signals advice please
Maintenance & Workshop TalkHaving mangled two of the turn signals on my 2011 speed triple, I ordered some replacements before realising they do not come with the damn wires! Are these still simple to fit? Or will I need to get a mechanic to do the job?- 1
- 84
-
Lopan79 · updated
-
1215 triple weird cam chain scenario..... perplexed
Maintenance & Workshop TalkHi Guys, just want to put out there to the brains trust a perplexing issue I have..... My 2014 Trophy has done about 20,000ks and for the last 3k or so I have noticed the cam chain rattle at start up taking longer to disappear. it's last service was about 2k ago. As the rattle would disappear...- 0
- 69
Join now to ask and comment!