Triumph Rat Motorcycle Forums banner

F3 fork mod...

11374 Views 57 Replies 17 Participants Last post by  mcasswell
There's been some discussion about this mod in the cafe forum. Some member's have already done this with very good end results. After reading that topic several times, I've decided I'm sold on the mod.

I read recently that someone sent their fork's off to racetech to have the goldvalves installed. This bike was apparently a "mule" for the project...I would assume so they can get a kit setup for our bikes.

The F3 fork's will permit more adjustability over the standard fork's as you will beable to control front ride height over a greater distance compared to stock. They are 1.375" longer than our's.

Anyway, if there's any intrest in this, I could post some pic's as I go along...once I get all my stuff.
1 - 3 of 58 Posts
The F3 forks would work especially well with 17'' tires, with their longer fork legs. You could check rake/trail and have the extra fork length to adjust accordingly.
Machine...your signature lol
It's a Hunter S. Thompson quote.

I like your new signature and pic.
all that black looks good with those polished carbies.
1 - 3 of 58 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.