Triumph Rat Motorcycle Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
287 Posts
Discussion Starter · #1 · (Edited)
Wasn't keen on the exhausts out there so had one custom made,
I wanted somethinbg similar to the Mv Agusta triple exhaust.
So was recomended an exhaust shop who were willing to take it on.

To help I sourced a 2nd hand silencer and shield, and they apadted it to fit.

Was hoping to get it closer to the frame, but there's not enough room to do that....
Here's how it looks (I painted it black ans then baked it, the shop left it raw stainless in case I prefered that, but I decided to paint it)


Tire Fuel tank Wheel Automotive fuel system Plant



Tire Wheel Fuel tank Vehicle Automotive fuel system



Tire Wheel Fuel tank Vehicle Automotive fuel system




The last photo is a mock up with the pipe work closer to the frame, thoughts on this?
I thinking of taking it back to see iof they can get it closer to the frame to remove the void...
Tire Fuel tank Wheel Automotive fuel system Plant
 

·
Registered
Joined
·
287 Posts
Discussion Starter · #8 ·
Looks killer.
But you gotta let us hear it!!!
It's interesting note, aaround 3,500 rpm I must admit it's a bit annowing in the ear, but below or beyond that all good.
I find doing around 60 km/h which is the speed limit of most areas I ridewhen going to work and back,it's at around 3,500 rpm

But when giving it the beans, it's actaully quite, or quieter....

I'll do a video with my phone, see how the audio picks up with that
 
1 - 11 of 11 Posts
Top