Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
653 Posts
Discussion Starter · #1 ·
The first time my center stand broke was 4yrs ago. I welded it back together and welded 1/2x1/8 x 3" doublers to reinforce the weld. One of the doublers snapped after 4 yrs.
This time is purchased a 6" x1/2" bolt, cut the head and threads off. Placed the shank inside the tube (the one you put your foot) welded the tube together, grind the welds, installed two more doublers, grinded again and then painted. Took 2-3 beer and same # of hrs.
Hope this helps.
Mark
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top