[68TR6R]

Anyone have a good set of cylinders?

Hi all,
I'm looking for a set of usable jugs for my TR6R. My current set has one cylinder sleeved and I don't feel safe boring it out to .060. If anyone has even an OK set with no broken fins etc I'd be interested. They do not need to include the tappet blocks and I don't care if the finish is rough or rusty. Please PM me if so. Ebay is currently out of ones that look promising.

Thanks

 

[McQueen]

...must...resist...making...Pam...Anderson...joke...here...

 

[GleaminTwin]

I think there might be a Jugs magazine in which many types and sizes of jugs are featured. Lol, the last time I looked through a copy was many years ago so I'm not abreast of the latest model jugs that are most in demand these days.

 

[68TR6R]

LOL But in all seriousness......

 

[McQueen]

Sorry, 68TR6R. It was too hard to resist.

Plus, your request for jugs comes on the heels of Germ's request to "come feel his rods" after he'd pulled the top end off his 500.

Bunch of juveniles 'round here.

I'd check the local Brit shop. There's eBay, of course. Not sure where you're located. My local shop, Raber's are just a UPS shipment away.

 

[t100rc]

...must...resist...making...Pam...Anderson...joke...here...

It was bound to be either you or me making the gratuitous first b00b remark ... I might have gone Ann Margret here ... nice to look at AND rode a Triumph ...

 

[panda]

http://www.tms-motorcycles.co.uk/store/products/list.asp?cat_id=115

have

70.6304/K 650cc CYLINDER BARREL (9 STUD) & HEPOLITE PISTON SET £250.00
70.6304/M MORGO 750cc CONVERSION BARREL & PISTON KIT (9 STUD) £236.00

if it helps

 

[Sunshine Jim]

Triumph 650 Cylinder, 9 Bolt, Stock Bore?

http://motors.shop.ebay.com/merchant/moorecameras?_rdc=1

guy has several sets up and a fairly good rigid frame too. good luck, I need barrels myself.