[thefledgling]

Anyone know if these are retailed in the UK?

The Shropshire clamp kit, which would also hold push-in header pipes are very expensive for what they are at £145.

My cylinder head is low mileage, don't think there's any wear yet. Intending to get headers without crossover pipe, and want to prevent pipes moving in head causing wear

Thanks

 

[DMadigan]

No idea but seems a little pricey for simple turnings.

 

[TMc987]

Available via The Bonneville Shop in the U.S. (No affiliation): TRIUMPH T140 TR7 750 EXHAUST ADAPTERS FOR PUSH OVER PIPES PN# TBS-0220

Check their shipping policies here: Shipping & Returns - The Bonneville Shop

 

[thefledgling]

Available via The Bonneville Shop in the U.S. (No affiliation): TRIUMPH T140 TR7 750 EXHAUST ADAPTERS FOR PUSH OVER PIPES PN# TBS-0220

Check their shipping policies here: Shipping & Returns - The Bonneville Shop

Thanks. Have just found their eBay listing. $15 postage, $17 import charge. Then larger finned clamps to buy Makes it too expensive.

 

[StuartMac]

Hi,

My cylinder head is low mileage, don't think there's any wear yet.

Consider having the exhaust ports tapped for standard Triumph screw-in spigots?

Post a rough location?

Hth.

Regards,

 

[thefledgling]

Hi,

Consider having the exhaust ports tapped for standard Triumph screw-in spigots?

Post a rough location?

Hth.

Regards,

Yes, that wouldn't cost any more than the Shropshire kit, and is the best solution, I'm sure.
It means removing head thought. It's presently not leaking oil, so don't want to disturb it!