Triumph Rat Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
Let me preface that I do have the service manuals (and I read them).

I need to pull the outer gearbox cover on '67 T120R. The right footrest is in the way. I don't see anything referencing removal of right rear engine plate. Is it necessary to remove the rear engine plate to remove the outer gearbox?

And also, am I right that you can leave the kickstarter and gearchange pedal in place? Using these to wiggle the cover off?
 

Attachments

·
Registered
Joined
·
57 Posts
Discussion Starter · #4 ·
Howdy!

Mount plate, No; footpeg Yes. You need a 3/4" shallow socket and you're going to get your hands dirty backing up that bolt way under there, to get the footpeg off.

Leave the kicker and shifter in place, but DO NOT move the shifter, or you'll have one or both plunger teeth fly off to a place where you are virtually guaranteed NOT to ever find them again. Remember to "re-wind" the kicker spring for re-assembly.

I'm relocating this thread to the General section.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top