Triumph Rat Motorcycle Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
401 Posts
Ahhh. I had the exact same problem on my 06. You have the wrong stand. There is no way to make that one work. As it turns out the factory catalog had the wrong pt nmbr.

Now when you get the right one it will come with these cheesy panhead screws that don't even have a smooth shank where they go through the bushings and they're way to small for the bushings. I got some brass bushings for mine to fix this, but a good alternative would be to aquire the screws out of the previous model's kit. It would at least fit the bushings in the stand in a precise manner.

By the way, the brackets, stand and screws are different for the correct kit. Sorry I don't have the correct pt nmbr.

My info came from Triumph America Headquarters in Newnan,Georgia.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top