Joined
·
438 Posts
Someone asked about the master cylinder i put on my bike. I ended up taking pictures this evening and am going to post them here instead of them slipping under the radar via a PM.
I got this MC with the brake calipers. The lines are stock Triumph. The 'Busa ones were too short and they weren't braided. The brake levers are interchangeable, so you can keep your Pazzos if you have them.
I had to make a modification when i added the GenMar risers. There was a tab on the end of the MC that made the line point forward. I needed more slack for when the forks were at full rebound, so removed the tab with a dremel tool.
I left the bolt for the old reservoir on the handlebar. I may use it for a GPS mount later, but it could be a good mounting point for other accessories, too.
Here is the album at Photobucket:
Photobucket
Here's a teaser pic:
.
I got this MC with the brake calipers. The lines are stock Triumph. The 'Busa ones were too short and they weren't braided. The brake levers are interchangeable, so you can keep your Pazzos if you have them.
I had to make a modification when i added the GenMar risers. There was a tab on the end of the MC that made the line point forward. I needed more slack for when the forks were at full rebound, so removed the tab with a dremel tool.
I left the bolt for the old reservoir on the handlebar. I may use it for a GPS mount later, but it could be a good mounting point for other accessories, too.
Here is the album at Photobucket:
Photobucket
Here's a teaser pic:

.