Triumph Rat Motorcycle Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1 (Edited)
TLDR: I'm taking my bike to get tuned, have the standard tune from Dyno Jet loaded on PCV. Can I ride my bike the 25 minutes to the dyno shop with the O2 sensors turned off through tuneecu and unplug from the wiring harness without harming the bike and being get to the shop.
Mods: pod filters - xpipe - PCV

Last year I installed Power Commander on my bike and took it to a local tuner. At the time I didn't know you needed to remove the O2 sensors because the O2 sensors will control the bike between 1% and 6% throttle. The tune I have is great when hitting the throttle hard but can "stutter" once in awhile while cruising around. In order to prepare for the new Dyno tune (using a new/better shop) I removed the old tune and loaded the unmodified tune from Dynojet onto the PCV. Can I remove an unplug the O2 sensors while disabling them through tuneecu and still make it the 25 minutes to the dyno shop without harming the bike and still get there? I really would hate to have to do it at the shop.
 
1 - 3 of 3 Posts
Top