Triumph Rat Motorcycle Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
659 Posts
No 05 model year or 06 model year NON-ABS ST was manufactured with 5/8 MC's.

Some 06 ABS ST's were manufactured with 5/8 MC's.

Triumph will replace under warranty the 14mm MC's for the 5/8 MCs for the ABS bikes. I'm not so sure they will easily do that for the non-ABS bikes.

At least this is my knowledge and experience in dealing with the Greek distributor who got in contact with the factory in the UK in my presence. Triumph asked for the VIN of the bike to authorise the replacement.

I wonder if the 07 bikes are delivered with the 5/8 MCs. All of them? Just the ABS's?



[ This message was edited by: NikosR on 2006-11-28 09:59 ]
 

· Registered
Joined
·
659 Posts
Look behind the MC body on the side facing the handlebar. There should be a 14mm or 5/8 sign. Just black on black raised letters. Easy to miss.

[ This message was edited by: NikosR on 2006-11-30 09:03 ]
 

· Registered
Joined
·
659 Posts
On 2006-11-30 09:23, Johnmala wrote:
Efharisto!
My pleasure. Do you know any more Greek?

Actually you might have a 4/8 there or 48 meaning 14mm (I think... for some reason). Some MCs are marked in metric others in inches. It's confusing.

So what do you have?

[ This message was edited by: NikosR on 2006-12-01 08:24 ]
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top