[cober57]

How do I check the alternator on an 01 Tiger? I used VOM to check for continuity between the 3 wires coming from Stator windings. Looked consistent from one to the other... .5 ohms
Started the bike, and looked for AC out of the unit and get nothing... or maybe a volt or two... inspection of windings showed nothing ... any ideas???

 

[AVM]

To check AC output disconnect the stator (alternator) from the regulator. Rev to ~5000rpm and check A-B, B-C, A-C. You should get better than 60 vac and the same readings on each set of wires.

Here is a good fault finding chart fro Electrosport. It's a good chart but don't buy any parts from them.

http://www.electrosport.com/technical-resources/library/diagnosis/pdf/fault-finding-diagram.pdf