Triumph Rat Motorcycle Forums banner

stalling

  1. Tiger's 885i & 955i - Mods & Workshop
    Got this bike over 25k ago and it has been flawless up until this year. It started stalling when hot in the spring. It always restarted but got to the point where I had to keep the throttle cracked to keep it running. I did the fuel filter as I hadn't yet, along with new plugs and it felt...
  2. Daytona675 Forum
    Hi guys, I have a 2009 daytona 675 for about 6 months now and the bike started stalling. The stalls happens while I'm slow riding maybe in traffic and I have to clutch in. So noticed the RPM is low while in gear and before the bike goes off. I did some trouble shooting and discovered my fuel...
  3. Triumph SuperSports
    Hi guys, I’ve read loads around this site but can’t find an answer for the problem I am getting. I’ve not long got a Daytona 600 2004. I got it as a non runner and put a few good hours into it now. In which I had it started in the first couple thanks to a few relay swaps. The problem the bike...
  4. The Welcome Center
    Hello someone who knows the specifications to test the coil on the speedmaster carb. 790 ccm. 2004 can measure 0.5 to 1 ohm resistance on the 12v side and can not measure anything on the high voltage side do not quite know where to measure from. starts fine but has a missfire every 5 sec.
  5. Water Cooled Twins Technical Talk
    I've got a little problem when commuting these days: my '16 Street Twin stalls quite a lot when riding in the city. At first I blamed myself for misusing the clutch but after a while, I realised it wasn't me but the bike. Symptoms: - The bike stalls when I twist the throttle very lightly. The...
  6. Air Cooled Twins Technical Talk
    Hey Triumphrat.net! I'm having some trouble with my 2015 Bonneville: The bike just stalls out at idle when the EFI "choke" is all the way in. Doing a proper start and allowing the bike to warm up does nothing to stop this. However, I can keep the bike alive in this position if I keep just a...
  7. Street Triple Forum
    Hiya all, let me start by thanking all of you for giving your time to this excellent forum - I have done a lot of troubleshooting based off of ideas from other posts in here before posting this myself. Now, to my issue... Previous mods of mechanical note: Aftermaket exhaust - EXAN X-Black Evo...
Top