Triumph Rat Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 19 Results
  1. Tiger's 885i & 955i - Mods & Workshop
    Hi, my Tiger makes a loud clicking noise and it has worsened. I made a mechanic listen to it thinking it has something to do with a loose cam chain. He said it is an exhaust leak. Judging, by the noise and pattern it appears to be a leak. Apart from the usual rust, the header pipes look fine...
  2. Street Triple Forum
    So I have a 2020 Street Triple 660SA2L, I am wondering if headers for a Street Triple 765rs Would fit? I am hoping to replace the stock headers but cannot really find any aftermarket ones around, I have tried SC Project but they have no specified 660 Headers.
  3. Speed Triple Forum
    hello, I want to make larger headers directly from the engine block with a 2.5-inch( 63MM) pipe, but the slip-on I have is only 1.75 inches (44mm)wide. When the 2.5-inch header connects to the 1.75-inch slip-on, and the slip-on has two 1.65-inch (41mm) outlet pipes, will this cause a loss of...
  4. Water Cooled Twins Talk
    Hi all I purchased a 2022 Scrambler 1200 XC as my first bike after completing my DAS and passing mod1 and mod2 in September. Absolutely loving the bike, it's a blast. I love the scrambler looks and am quite tall at 6'3" so it's the perfect bike for me. I wondered if any UK 2019-2021 Scrambler...
  5. Air Cooled Twins Technical Talk
    Howdy, I'm going to be replacing my exhaust studs soon as they're rusty and a bit beat up. What are the torque specs for the exhaust studs themselves? I know the flange nuts are 19nm, but I can't find anything for the studs. I'd imagine it's more than 19nm, otherwise, it'd be tricky to tighten...
  6. Hinckley Classic Triples
    Bike: 2003 TBS 3 into 2 w/ Z over pipe. Run Epco SS reverse cones. Don’t like the original header configuration w/ 2 on right 1 on left. I bought and misplaced an older Speed Trip? Header 3-4-2 to replace oem. I swear it was Stainless Steel as I don’t think a magnet would stick to it. I’m...
  7. Water Cooled Twins Talk
    Hi everyone! I’ve been wanting to customize the exhaust on my 2020 Speed Twin and really like the clean look of the British Customs Drag Pipe System. The only issue is that its taking them FOREVER to get them out so I can buy them! Do any of you happen to know of other options that are similar...
  8. Air Cooled Cruisers - America, Speedmaster
    What’s goin on? I have not fully acquainted myself with the site so if this show up in the wrong area… apologies. I have seen a few different posts On the subject but no answer to this specific piece… I have a 2013 Speedmaster and am looking to do an exhaust upgrade (for sound purposes for the...
  9. Water Cooled Twins Technical Talk
    Hi All, I installed British Customs Slash Cut shotgun slip-ons with Free Spirits De-Cat. The Bike sounds great and a hell of a whole lot louder, I Love that. Issue is on deceleration I am getting a lot of After-fire to the point where it is too much(pop, plop.plop plop, pop) and pops that would...
  10. Club Cafe'
    I am deciding between the Arrow 2:2 pipes non-cat (=99901']link, 71664MI) and the Arrow 2:2 pipes converted from cat to x-pipe (=99902#product-details-tab-description']link, 71658MI). I read somewhere on this forum you actually get a performance upgrade by having the x-pipe version vs the...
  11. Thunderbird Cruiser Chat
    Seeking advice re my headers which are showing signs of pitting and corrosion on the chrome. Does anyone know if Triumph still have new ones (Australia based) or if there is a way to Re-chrome successfully. I’ve been looking online for good condition used ones, but they are few and far between...
  12. Thunderbird Cruiser Chat
    Seeking a set of used headers in good condition as mine have some corrosion near the top and I’m wanting to replace them
  13. Water Cooled Twins Talk
    Already own a pair of Zard exhaust slip ons in black and want the exhaust headers to be black as well. I noticed that the Triumph Part website has the Street Twin 2016 and 17 here: Triumph Street Twin Exhaust Headers Pair - Black. SILENCERS, Motorcycle, KITS, Kit - A9600609 | Cross Country...
  14. Air Cooled Twins Technical Talk
    Hi all, I've got a 2014 T100 Black with no mods currently (same as this: 2014 Triumph Bonneville T100 Black @ Top Speed) and looking into going 'all black' (I like the look of the newer T100 Blacks from 2016-on) - this includes the current chrome exhaust headers and silencers, among other...
  15. Water Cooled Twins Talk
    Hello everyone, I want to throw on the cone engineering shorty slip-ons, black coated color. But debating whether to just keep the current exhaust headers pipe and wrap them in black, or changing to the OEM part A9600609 Street Twin Black Exhaust Headers. I rode to a handful of shops around LA...
1-15 of 19 Results
Top