Trident 900 Carb Jetting - Triumph Forum: Triumph Rat Motorcycle Forums
T3 Sport / Touring Forum For the discerning Hinckley Sporting Enthusiasts. Open to all lovers of the original T3 Sport Models including the Trident, Sprint, Sprint Exec, Daytona, Trophy, and Speed Triple.

LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 02-10-2008, 06:45 PM Thread Starter
Grand Prix 125
Join Date: May 2006
Posts: 37
Trident 900 Carb Jetting

Well i was in the process of installing a Dyno jet kit on my Triumph Trident 900 with D&D slip-ons and a k&n air filter.... Well the jets that go all the way across say 124... the two sides where 125... and the center was 120... and that just doesnt seem right to down jet the two sides... or does it?..... and i also took the bowl off the center carb..... and a small brass peiace that is smooth and coned on one side with a small hole in the center.... looks like it was set in a hole somewhere in side the carb any diagrams out there for the mikuni carb?..... has anyone had experience with the stage one dyno jet kit and did it help? and is it correct?
NewMetal is offline  
Sponsored Links
post #2 of 4 (permalink) Old 02-10-2008, 07:32 PM
Main Motorcycle: '98 Sprint Executive
Senior Member
sailfish's Avatar
Join Date: Dec 2003
Location: Lincoln, NE
Posts: 1,440
Other Motorcycle: KTM 640 LC4
Extra Motorcycle: '01 Suzuki DRZ400
Dyno Jet uses a jet numbering system independent of what the carb manufacturers use. The numbers on the DJ jets correlate only to the Dyno Jet line, so your new jets may, in fact, be larger.
sailfish is offline  
post #3 of 4 (permalink) Old 02-10-2008, 07:49 PM Thread Starter
Grand Prix 125
Join Date: May 2006
Posts: 37
Thank you very much.... i didnt want to get all done and it be funky....
NewMetal is offline  
post #4 of 4 (permalink) Old 02-11-2008, 04:00 AM
Senior Member
YrfuneralMytrial's Avatar
Join Date: Jan 2003
Location: Fayetteville, Arkansas
Posts: 346
I just had this mod done on my 96 Trident 900. Same set up...Trident 900, D&D pipes, K&N filter, Dynojet kit. I paid to have it done (over my head). The original kit that was sent to me was for the 750 Trident...and the seller (Tucker Rocky) was unaware of the difference. Is there a chance you might have got a 750 kit? Anyway, it's an awesome mod no doubt about it. I feel like I've gotten a new bike. Throttle response, power... this is weird, but I swear it handles better in the twisties as well. Definitely wish I'd done it sooner.
YrfuneralMytrial is offline  
Sponsored Links

Quick Reply
All posts must adhere to Forum Rules

Register Now

In order to be able to post messages on the Triumph Forum: Triumph Rat Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter your valid email address, that can receive an automated confirmation message. Otherwise, you won't be able to gain full access.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Carb Jetting - THANKS! justbrian Air Cooled Twins Technical Talk 0 08-10-2007 01:33 AM
carb jetting stmike Hinckley Classic Triples 4 07-19-2007 09:21 AM
Jetting a Ca. Sprint 900 LaneSplitter T3 Sport / Touring Forum 9 12-05-2006 10:07 AM
TOR, carb re-jetting bonnieboy Air Cooled Twins Technical Talk 4 11-14-2006 02:33 PM
95 trident 900 D&D Pipes/carb jet ? T3 Sport / Touring Forum 21 04-02-2005 08:04 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

For the best viewing experience please update your browser to Google Chrome