Triumph Rat Motorcycle Forums banner

L.E.D. Idiot Light conversion (later Speedmaster)

7K views 18 replies 10 participants last post by  carnut108 
#1 ·
Hello,
I know the L.E.D. idiot light conversion kits are readily available, but some sellers state they are for models up to 2010 only.
My Speedmaster is a 2016. Has anyone fitted them to a later model, and do they work?

Thank you.
Doug.
 
#2 ·
I have these on mine and they work well.
https://www.fasteddysports.com/products-page/?product_id=774
Not sure if you need to do the diode mod when just putting in the led turn indicator idiot light or not. I put in led turn signals and had to do the diode mod anyhow, so no experience with just the idiot light conversion.
Edit: mine is a 2013 so should be the same as the 2016.
 
#5 · (Edited)
Could it have anything to do with the CANbus communications between devices? When did that conversion happen?
 
#12 ·
Idiot Light conversion kit arrived from New Bonneville today.
The 3 LED bulbs all look the same though!
I thought there would be 1xRed (Oil Pressure), 1xGreen (Neutral), and 1xGreen (Indicators) with the ability to accept reverse polarity for the single indicator bulb!

If anyone has fitted them, were your's all be the same?

Americaoak ?
rwm33418 ?

Cheers,
Doug.
 
#13 ·
Yes, they are the same white light just like the incandescent lamps being replaced. The colored lens in the console is the only thing that makes a color difference.
 
  • Like
Reactions: DigiDoug
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top