Triumphrat

ello_ello

I now have all my parts to basically complete the stage 1 upgrade of my Thruxton. BC air box kit and Norman Hyde Pea Shooters (I yanked the AI the day i took the bike home). I'm on a Mac so I can't use the carb tuning exe I've seen linked before. Any recommendations on jets shims etc. I live at 400ft above sea level.

Any advice or things to look out for when doing this install are appreciated too since I'm a novice.

sweatmachine

42 pilots, 1 shim on each needle, 140-145 mains, and maybe 2 turns out on the idle mix.

that should get you really close.

__________________
"If you will it Dude, it is no dream"

904cc Custom Bonnie Cafe Fighter!

killian101

you might want to replace the mixture screws...

sweatmachine

why? with what?

__________________
"If you will it Dude, it is no dream"

904cc Custom Bonnie Cafe Fighter!

peter_s

I am thinking he is referring to the
knurled thumb screw you can order to make mixture adjustments
toolless?

killian101

Yes...sorry for lack of explanation. Makes adjustments a lot easier

cafecruzin

my Thruxton(no airbox madaz mufflers similar to staintune) at approx 50 meters above sea level works best with 40 pilots 1.5 turns and 140 mains + 1 shim

__________________
Only Irish coffee provides in a single glass all four essential food groups:
alcohol, caffeine, sugar and fat..
Alex Levine
Of all the tyrannies that affect mankind, tyranny of religion is the worst.
"Thomas Paine"