Triumphrat

mecscc · 01-15-2008

Got to do my 18000 change and was digging around in the garage. I found a filter, T1210444, I must have bought a while back at the dealer. That is the correct filter for the Bonnie. Yes? No.?

(I have a tendency to pick up odds and ends at the dealer when I am there since he is 100 miles away and then forget I did it or forget to label things. NO! I am NOT getting old...........well,,,,,,,,,,,,,kinda.............. )

Bottle_Fed · 01-15-2008

I don't know if this helps Monte, but here you go.

NAPA Gold 1358 (There have been several problems with the 1365)
K&N KN-191
Wix 51358
Bosch 3300
Supertech 6607
PureONE PL14612 (MC - ML16817 or ML16819)
Baldwin B1400
Amsoil EAOM103 (black)
Amsoil EAOM103C (chrome)
Mobil M1-108 (Champion)
STP SMO 17

Greg

Skyblue62 · 01-15-2008

An old invoice lists the bonneville oil filter as part No T1210200

mecscc · 01-15-2008

Thanks. I wasn't clear enough. The filter is a Triumph OEM filter. I THINK that is the right part # for a Bonnie filter, but am just double checking. I also think they changed the part # in 2004 to the one I have. ???????

modre · 01-15-2008

here's a site where a guy did the research on oil filters

http://www.calsci.com/motorcycleinfo/FilterXRef.html

it's a good article...turns out the Purolator Pure One is all you need...and Pep Boys carries them. this one

Purolator Pure One PL14610, about $6.
is a bit longer than stock for max filter.

no need to spend dealer prices.

n578md · 01-15-2008

I just picked up a Triumph oil filter and it says T1210444. It doesn't fit and I had to glue it on with epoxy and it leaks about 1/2 quart of oil a day, but other than that it works fine. No, I'm just kidding, it fits and doesn't leak...

CAPTDON · 01-15-2008

I been using the NAPA Gold 1358 since new & had no problems. Get a good deal as the Co uses them & i get their price. I think made by Wic? There are so many filters that will fit!
One part Triumph used that is totally universal!

cgrossarth · 01-15-2008

Fram PH6017A fits my '01 Bonnie. By the way, don't all Triumphs leak?
Seems I heard that about xx years ago. Clyde

mecscc · 01-15-2008

Thanks for all the advice on what filters to get.

But I already have the filter and just got the answer, although ...........

"I just picked up a Triumph oil filter and it says T1210444. It doesn't fit and I had to glue it on with epoxy and it leaks about 1/2 quart of oil a day, but other than that it works fine. No, I'm just kidding, it fits and doesn't leak..."

So, thanks everyone, and especially n578md!!!!

schnabba · 01-15-2008

maybe the question is that, since you HAVE that one already, can you use it? Well - if you are replacing a spin on filter on a triumph (which you are, yes?) - then it will work. It's the replacement number for all spin on filters for triumph from what I can tell....

once that one is gone, however - I second the recommendation on the Purolator Pure One filter.