Triumphrat

Ocka

Hey guys, recently did the f3 forks swap on my bonnie (f3 with bonnie boots) and have come across a problem. The woodcraft bars fit onto the forks, but the bars themselves seem to be too thin to hold the controls in. It's barely there fitment wise.... but searching around it seems as though this should be a bolt on for most, am I missing something in this?

gerrieSTL

Are your controls 7/8" or 1"? Depending on your bike it could be 1" and the woodcraft bars 7/8". Woodcraft makes 1" bars as an alternative. I know my thruxton (2011) has 1" bars. I believe the woodcraft 1" bars use the same mounts and are like $30 more.


Sent from my iPhone using Motorcycle.com App

Easy13

+1. The 1" bars for Woodcraft clipons are necked down where they mount to the clipons. If your bars are the same diameter from one end to the other, you have 7/8" bars and your 1" grear will not mount well.

Congrats on the F3 swapover, BTW. I love mine.

__________________
"Cognito Ergo Wrenchum"

Ocka

Okay, after reading your post and googling around, turns out they come 7/8 standard as stated. Ordered the 1in replacement bars and will be awaiting their arrival! So thankful the bars are swappable.

Sent from my SPH-D710 using Motorcycle.com Free App