Triumphrat

ThruxOZ · 12-11-2012, 04:22 AM

Hello all
I've downloaded tune ecu version 2.4 which I intend to use on my2011 thruxton. I purchased a cable and installed driver, but when connecting it comes up with a error message"ecu not responding check cable connection"
Any ideas ?
Cheers

Forchetto · 12-11-2012, 05:19 AM

Some cables at the cheaper end of the market give no end of trouble. It must be a reasonable quality cable with a genuine FTDI chipset.

See recommendations and how to check cables on this sticky:

http://www.triumphrat.net/ecm-and-fi...e-caution.html

ThruxOZ · 12-11-2012, 05:49 AM

Quote:

Originally Posted by Forchetto

Some cables at the cheaper end of the market give no end of trouble. It must be a reasonable quality cable with a genuine FTDI chipset.

See recommendations and how to check cables on this sticky:

http://www.triumphrat.net/ecm-and-fi...e-caution.html

Thanks forchetto
I'll give that a try tomorrow
Regards

ThruxOZ · 12-11-2012, 08:39 PM

Well it turns out i got sent one of the dodgy chinese ones. a Nanjing Qinheng Electronics USB-Serial adapter, type CH-340 or HL-340