Triumphrat

zenbike · 11-05-2012, 02:20 PM

Looking to see if anyone knows of a good source to get the plugs for the front gauge wire harness and the rear light/signals.
I'm installing aftermarket units and would like to make them plug-and-play with the wire-harness and plugs on the bike.

Thought about heading trying to find a wrecked bonnie and clipping the wires, but there's got to be some electronic supplier out there that can source them for us.

LapinAgile · 11-05-2012, 05:21 PM

Would these work?

http://www.newbonneville.com/html/wiring_harness.html

zenbike · 11-05-2012, 06:29 PM

Quote:

Originally Posted by LapinAgile

Would these work?

http://www.newbonneville.com/html/wiring_harness.html

Yes that would work with some modification for the rear, my signals will be installed near the stock location. But, I don't want to pay $50 for the whole thing when all I need is the little white plug on the end and some spare wire that I've got laying on my bench.

I got the part numbers for the gauge cluster plug and found a source. The connector is the Amp/TYCO Multilock 174058-2. The pins are 173682.

Hoping to find the rear plug part number and just order the whole lot together.

TRIBON · 11-05-2012, 08:31 PM

Quote:

Originally Posted by zenbike

Looking to see if anyone knows of a good source to get the plugs for the front gauge wire harness and the rear light/signals.
I'm installing aftermarket units and would like to make them plug-and-play with the wire-harness and plugs on the bike.

Thought about heading trying to find a wrecked bonnie and clipping the wires, but there's got to be some electronic supplier out there that can source them for us.

Hi ive used these guys on ebay UK for my connectors when i was rewiring my new rear light and indicators .the connectors are the same as OEM .
http://cgi.ebay.co.uk/ws/eBayISAPI.d...n#ht_876wt_719