Triumphrat

uscgmac

Hey guys, just noticed that there seems to be some exhaust comming out of the header pipe where my TOR's slip on connects so I tightened it up as much as I could and still notice a little exhaust escaping through so I think I should put some kind of silicone seal material around the connection to seal it up. Any ideas of what would work best, type of silicone sealant or something on that order. Should it be air tight seal? I imagine that it should be. Thanks for any input.

teachnsurf

I've used clear and red, and others will recommend other high temp silicone sealants.

Just don't use bathroom caulk.

__________________
This is my Bonneville. There are many like it, but this one is mine. My Bonneville is my best friend. It is my life. I must master it as I must master my life. My Bonneville, without me, is useless. Without my Bonneville, I am useless.

cdubya

+1. Any high temp RTV Gasket maker, Black, Copper, Grey. I like copper.

__________________
'06 Scrambler: De-AI'ed, De-Snorked, K&N, Dual entry airbox mod, TORS, 135mains, 40pilots, thrux needles, no shims
'07 Bonnie Blk: De-AI'ed, De-Snorked, K&N + NH Peashooters, 118mains, 40 pilots, one shim
'05 Tiger 955i: Pulled airbox plate

uscgmac

Thanks, I just got finished putting on the black rtv high temp gasket maker and now have to let it sit for a hour or two before completly tightening again. Ill see how it works, should be fine.