Triumphrat

BonnieBlack07

Looking to switch my tank badge and really like the polycarbonate clear/silver badge for my bonnie black.

Anyone switch theirs out and do you have pics?
What tools will I need?

c

__________________
2007 Bonnie Black 865, AI/Airbox removed, K&N Pods, Preds, 140, 42, 2.5 turns

Baltobonneville

You'll need a security torx bit, I don't remember the size. This is a hollow torx bit. You can find sets of these bits in the bargain tool bin at Ace Hardware or at Harbor Freight for a few dollars.

I changed mine to the white Heritage badges after reading another thread about changing them. I like it, will live with it for a while, when I get tired of it, I'll put the original badges back on.

__________________
Marty
2005 Bonneville Blue 790cc, AI removed, Staintunes RC, Unifilter, no snorkel, 118/40/Thrux needle/1 shim/3 turns, tachometer, Ikon 7610s in back, Ricor Intiminators in front, Pirelli Sport Demons, D9 gauge panel.

road dog

Not my cup of tea, but just for you I linked this pic from http://www.motorcyclestore.us/triump...retro/68range/

__________________
-Phil

Bisley

I'd love to have the cast yellow accented ones on my Black but alas the '08's don't allow for such an easy change. They're stuck on rather than using the bolts.

BonnieBlack07

....I picked up the badges from there and will pick up the tool to do the sway today.
Thanks for the link

__________________
2007 Bonnie Black 865, AI/Airbox removed, K&N Pods, Preds, 140, 42, 2.5 turns

Derby Boy

Bisley,
I may be mistaken, but I think the 08's tanks still have the bolt holes behind the stick-on badges. I only say this because I was at the dealer when someone got their new black/white tank for their 08 bonnie an were complaining because it still had the holes. The dealer said they still put the holes in until 09 when they change tanks for F/I. That's all second hand info from our knowledgable dealers. Might be worth checking into.

__________________
"Another Trumpet Rat enslaved to a Bonnie"
07 B/B, AI gone, Emgo 60's Cocktail Shakers, K&N Pods, ARKed 40/142, 1 shim, +1 risers, Custom gauge bracket, never ending tinkering

Bisley

Thanx Derby - I'll have to try and check into that. Would really love to have the different badges. If I can use them I'd just worry about removing the stuck on ones without damaging the paint/finish.