Triumphrat

Geoff

So I spend part of Saturday glass beading and sanding the chrome off a used bub system. Clean everything really good, so Sunday morning I can use the HD wrinkle finish, and the can does a spit chunks for 3 seconds, then nothing. Of course the dealer is now closed, so I buy regular high heat flat black and go to it. Everything looks good, except the spot where the wrinkle finish paint was (I cleaned it good) it produced the wrinkle finish, in the other paint! So I sand it again, and clean it again and when I paint it it wrinkles again. I should have known better than to use a HD product on Bonny-she is allergic :
I have now sanded cleaned and painted for a 3rd time, and have my fingers crossed
G

__________________
I never wanted to lead, and I never wanted to follow.
I just wanted to ride

Cynr1023

good luck with her. and post up pics!!

__________________
2007 Bonnie Black
NB Drag Bars, Napoleon Bar-Ends, 19t Front Sproket, Bobbed front and rear fender, Lucas style taillight and bullet signal lights, blacked headers (hey, it's different than from when I got it), Matte Black Side Covers, and fenders, Red seat "embossing", Pazzo Racing Black anodized short levers, BC Predator exhaust, ARK & a rejet, AI removed
OTW: painted tank and headlight bucket w/ screen

speedblastr

Paint is a job. I bet I painted the Kaw tank 4 times. Sanding, Wet sanding, etc. I had the kerosene salamander going at the time because it was cold, tried to bring room to temperature. Still no luck , at the time. Called an old Motorcycle painter buddy of mine. ...Kerosene fumes. Also he told me that the temperature and humidity has to be just right. Probably won't help you any but that was my experience with black Epoxy,Oh yeah , the second time after I thought it was thoroughly dry,used compatible clear kote and the paint went way out in left field again-more sanding. Good Luck-G.

__________________
"At times Ya' have to hold a candle to the Devil." ~06' Blk-SpdMstr~130/40,TBS Ndls.-1Shm.,3T,AI out,Plrs-Blmth,UNI,Th-Bi.-pipes

speedblastr

How did it come out? Your project.:

__________________
"At times Ya' have to hold a candle to the Devil." ~06' Blk-SpdMstr~130/40,TBS Ndls.-1Shm.,3T,AI out,Plrs-Blmth,UNI,Th-Bi.-pipes

Geoff

they came out "ok". I am not burning to put them on, as I know it will require a re-jet,its perfect now, and I have some trips coming up, so I dont want to mess with it. I'll see if my brother has some time to walk me thru this picture thing.
G

__________________
I never wanted to lead, and I never wanted to follow.
I just wanted to ride

sweatmachine

if you want to see some black bubs click the link below called "sweat's bonnie"

__________________
"If you will it Dude, it is no dream"

904cc Custom Bonnie Cafe Fighter!

Silverado57

Geoff, can't wait to see them. Black pipes usually look great on a Bonnie.

__________________
Kevin
Luceo Non Uro
NJ USA

speedblastr

Hey Sweat,Did you do those yourself ? I think I asked you before , amongst 10 other questions. They do look sweet. I wondered what black headers wou:ld look like on my blastr.

__________________
"At times Ya' have to hold a candle to the Devil." ~06' Blk-SpdMstr~130/40,TBS Ndls.-1Shm.,3T,AI out,Plrs-Blmth,UNI,Th-Bi.-pipes

sweatmachine

yep, did 'em myself. BBQ black spray paint and 0000 steel wool.

__________________
"If you will it Dude, it is no dream"

904cc Custom Bonnie Cafe Fighter!