Triumphrat

03cruiser

Gentlemen, I wouldn't ask this except I am thousands of miles away from my Speedy. How tall are the stock Speedmaster handlebar risers?

__________________
http://militarysignatures.com/signatures/member2196.png

mag10

they are about 4 1/2 inch. Any shorter with the stock bar and they would hit the tank. I added 1.1 inch to mine, better fit.

__________________

see my wicked black speedmaster 904cc, 12:1 JE racing pistons, thunderbike cams, ported and polished head, scepter pipes, 39mm FCRs.

dazco

I'd like mine to pull back and up about an inch each way. But all the aftermarket one's i see look ugly compared to the stockers. Wish someone would make some that look like the stock risers.

mag10

Daz,

the spacers that I made bring the bars up approx .90 inch and back .65. they were very easy to make. I made them slightly bigger but the same shape as the stock risers so they look nice. The grade 8 hardware is readily available but not in metric. I don't have a camera handy at work but I will try to post a picture later today.

what is a set of risers or spacers worth?

__________________

see my wicked black speedmaster 904cc, 12:1 JE racing pistons, thunderbike cams, ported and polished head, scepter pipes, 39mm FCRs.

mag10

one of my co-workers had a camera, so here are my riser spacers.

__________________

see my wicked black speedmaster 904cc, 12:1 JE racing pistons, thunderbike cams, ported and polished head, scepter pipes, 39mm FCRs.

dazco

Wow, those are nice mag ! Good work.