Triumphrat

Tenover · 10-03-2005, 03:25 PM

I'm filling out my order for a bunch of mods right now from BellaCourse....along with bars, mirrors, etc..., I really want to get rid of the massive turn signals and rear tail light. I would like to order some of theseTHESE (the clear cats eye ones) to replace the front and rear turnsignals. Do I need to order another part to attach them to, or do they fit on the stock locations? And will those be sufficient for the front AND rear? Haven't found a good replacement tail llight yet....

RaceDweeb · 10-03-2005, 04:22 PM

You're always welcome to contact me direct with these questions, but since I'm here too, I'll dive right in.

The BCC-065 Cat's Eye Indicators fit directly into the stock indicator mounting holes. In front at the headlight ears (std/T100) or bracket (Thruxton) and at the rear license plate bracket (all models).

Here's the part that catches some people off guard. These Cat's Eye Indicators are dual element lamps. There's a high beam for flashing as well as a low beam that can be used as running lights. The two wires coming out of the indicators are both +12VDC leads. One for high beam and one for low beam. There isn't a separate ground wire like the stock units. The Cat's Eyes ground themselves by virtue of being bolted to metal parts. Some have added their own ground wires using an appropriate sized eyelet & wire. Your choice.

If you go to me Motorcycles page on my site, you'll see my Project 61 bike which has these indicators mounted, however I painted them black so they would visually disappear, so look closely.

Mike

Tenover · 10-03-2005, 11:46 PM

Are they "Plug n'Play" or does some rewiring/soldering need to be done?

RaceDweeb · 10-04-2005, 01:01 PM

You cut & splice the wires. Super-simple.