Triumphrat

MARKO65

Hi all.....

I just scored a new Union-Jack tank cover for my new to me 05 Bonneville. He is my problem.... i thought i had every type of tool but as you all know those darn Torque bolts that hold on the badge. Where can i get a torque head to remove those bolts, auto store?

cheers

Marko

Aussiematt

Any auto store or general hardware will have the tool you need. You'll be glad of those security type bolts as it stops people deciding they need your tank cover and badges more than you do...

__________________
2004 Thrux, FCR39's, Uni filter, 813 cams, Works shocks, Ricor valves, progressive springs, Pieman ignitor, green springs, GT501s, Beringer caliper, predators, damper, fork brace, Corbin gunfighter, custom tinware, lowered instruments, JMC swingarm

propforward

Hi Mark, if you are in the united states Sears has security Torx bits, which is what you are after for that job.

As Aussiematt says, most auto parts stores carry them also.

__________________
Rule 1: Cardio

Rustic Road Progress

MARKO65

Thank you for all your replies..... i'll head over to Advanced auto tomorrow. Hey i got the Union-Jack cover new for $50 shipped, pretty good deal i thought.

Cheers

Marko

1962gypsy

...and be careful Marko. Those little suckers are delicate. Don't ask how I know this.

__________________
Randy Lambert
Gypsy MC

He who cares least wins

Baltobonneville

Look in the bargain tool bin at Ace Hardware; with luck you'll find a set of "security bits" for a few dollars. The tank badge screws take a T25.

__________________
Marty
2005 Bonneville Blue 790cc, AI removed, Staintunes RC, Unifilter, no snorkel, 118/40/Thrux needle/1 shim/3 turns, tachometer, Ikon 7610s in back, Ricor Intiminators in front, Pirelli Sport Demons, D9 gauge panel.

MARKO65

Marty

Thank you!