Triumphrat

05-23-2007

I have an '07 daytona 675, and when I got it, it was set to MPH on the speedo. Being Canadian MPH is gibberish to me and I want to know if I can change it to KPH... I looked through the manual and couldn't find any way to change it, is it possible?

Chrisc321 · 05-23-2007

not sure if it is the same, but in my TT600 you hold the "mode" button and it will change. You may have to try it more than once because it also changes from Fahrenheit to Celsius and back.

Will · 05-23-2007

The same issue came up somewhere else, but now I don't remember the answer. It may have been to hold down all three buttons for five seconds. You have to do it on purpose, so it is very unlikely to reset accidentally.

05-26-2007

Thanks for your replies guys, I will give your suggestions a shot and see what happens.

Midnightsun · 03-23-2008

i have the same problem did you find out how to do it?

Will · 03-23-2008

DOH! There are only two buttons on a TT600/S4 speedo cluster. You have to hold down one or both buttons five seconds. I always kept mine with MPH but Celsius degrees. Don't worry about screwing it up if you push down the wrong button. If you hold it down and wait, and nothing happens, you picked the wrong one. It has been just over two years since I had a TT600, so I have forgotten some things, and the exact procedure is one of them