Triumphrat

00wabbit · 02-03-2005

I'm looking for a dealer that can help me re-jet my bike and get it dialed in after installing new cams.

I have tried one dealer in Dallas but I think they dont have the proper equipment to check the fuel mixture.

Do you guys know of any? Do I have to go to a triumph shop or is there some other performance shops that can help me?

00wabbit · 02-03-2005

I'm looking for a dealer that can help me re-jet my bike and get it dialed in after installing new cams.

I have tried one dealer in Dallas but I think they dont have the proper equipment to check the fuel mixture.

Do you guys know of any? Do I have to go to a triumph shop or is there some other performance shops that can help me?

tbsrider2000 · 02-04-2005

Not sure about Dallas, but the Waco dealer is AWESOME... They know modern Triumphs better than any other place I've seen around here.

My closest dealer is in Austin, but I and my buddy Richard have taken our bikes all the way to Waco the past couple of times. Richard had installed the Toga mufflers, and had the Waco dealer re jet the carbs for him and his bike runs awesome.. sounds great too... and not a pop to be heard

If you can handle taking it that far to be worked on, I highly recommend them.

tbsrider2000 · 02-04-2005

Not sure about Dallas, but the Waco dealer is AWESOME... They know modern Triumphs better than any other place I've seen around here.

My closest dealer is in Austin, but I and my buddy Richard have taken our bikes all the way to Waco the past couple of times. Richard had installed the Toga mufflers, and had the Waco dealer re jet the carbs for him and his bike runs awesome.. sounds great too... and not a pop to be heard

If you can handle taking it that far to be worked on, I highly recommend them.

Shawn · 02-04-2005

You might try EuroSport Cycle in Fort Worth. I have family in Fort Worth and visit them on almost every trip.

I don't have any service experience with them, but they are very nice folks.

Shorty · 02-15-2005

Bought my Bonnie from Euro Sport Cycle in Ft. Worth, and they are a great bunch of people and I'm sure do a great job servicing your bike (a little too far for me to go).

I have found though that RPM Cycle in Dallas charge a little less for service and they come highly recommended by many.

The owner Keith Martin and his crew just rebuild the Texas Cee-gar Bonneville racer and to my understanding have rebuild many of the classic bikes for Triumph which were damaged in the fire over in England (they've got some cool old model Bonnies on the show room floor).

Here's their # 972-620-3883
2575 Southwell (at the corner of Shady Trail off Walnut Hill).

Shorty

04-01-2005

The best in Dallas is RPM Cycles. The owner is the guru of Dallas and was just on the biker build off on Disc. Channel rebuilding Rick Fairless motor for his chopper. I just met the guy through a friend last week and he took us in the back and is restoring the editor of Cycle World's brothers bike that past away last year and a couple more for the motorcycle museum in England. He know's his crap.... new and old.